10" Zyxel MG-105 & XMG-105 2.5G Switch Mini Rack Mount - 1U

Fits the Zyxel MG-105 and XMG-105 2.5G switches in a 10 inch mini rack, 1U. It holds the switch level with the port face forward, so every cable stays reachable and the switch stops sliding around a shelf.

FITS

• Zyxel MG-105 (5-port 2.5GbE)
• Zyxel XMG-105 (5-port 2.5GbE plus 10G SFP+)

⚠️ Before you order and install:

• Check yours is a 5-port model. The 8-port MG-108, XMG-108 and XMG-108HP sit on a wider chassis, and the GS1200-5 is different again. I list separate mounts for those.
• Zyxel ships the rubber feet loose in the box as adhesive pads. Leave them off. This mount is cut to the bare chassis and the pads add enough height to stop the switch seating properly.

KEYSTONE OPTION

Choose one at checkout:

• No Keystones. Just the mount.
• +1 Keystone. One holder to the right of the switch, with an RJ45 keystone jack and an Ethernet cable included.
• +2 Keystones. One holder on each side of the switch, with two RJ45 keystone jacks and two Ethernet cables included.

The jacks and cables come with the keystone options, so you can bring a network drop out to the front of the rack without sourcing the parts separately.

WHAT YOU GET

• The mount, printed as one piece, ready to drop the switch into.
• The RJ45 keystone jacks and Ethernet cables that go with the option you pick.
• No screws of any kind. The switch sits in the mount and the mount sits in your rack.

MATERIAL
3D printed in PETG. A fanless 2.5G switch runs warm all day in a closed rack, and PETG holds its shape at temperatures that make PLA sag.

A 19 inch version is listed in my shop too. 💬 For any custom design requests please message me.