1 / 4-20%19" Kiloview CUBE R1 NDI Recorder Rack Mount - 3U
$8.49 US shipping Arrives
A Double already fills both halves. Choose Single to pair it with another device.
At a glance
- Rack
- 19", 3U tall
- Material
- PETG, which holds its shape near warm gear where PLA softens
- Not included
- Rack screws. Use whatever your rack takes.
- Made
- Printed to order in Illinois
⚠️ Before you order:
- Check your unit reads CUBE R1. The Kiloview CUBE X1 is a different chassis and will not fit this mount.
Fits the Kiloview CUBE R1 NDI recording system and gives it the full rack row at 3U in any standard 19" rack. The recorder slides in through the front panel, so the touchscreen, the drive bays and the controls stay in reach once it is racked.
FITS
- Kiloview CUBE R1
WHAT YOU GET
- The mount in two parts, with the screws and heat-set inserts to join them
- Rack screws are not included
MATERIAL
3D printed in PETG rather than PLA. The CUBE R1 runs its fans continuously, and a loaded rack shelf gets warm enough that PLA starts to sag where PETG holds its shape. The cradle is vented top and bottom so air keeps moving over the chassis.
💬 For any custom design requests please message me.
Every 19" mount bolts together before it goes in the rack. Which guide fits depends on how this one is built:
- Two halves with a seam down the middle19" Modular Rack Mount: Assembly and Install
- A centre tray and two separate ears19" Extended Rack Mount: Assembly and Install
Either way: rack screws are not included, the oval slots take M6 and #12-24, and the device goes in last.
Questions about this part
Is this for a 10 inch or a 19 inch rack?
It is made for a standard 19" rack and takes 3U of rack space.
Are rack screws included?
No. Rack screws are not included, so use whatever screws your rack takes.
What is it made of?
PETG, which holds its shape near warm gear where PLA softens.
How fast does it ship?
It is printed to order in Illinois and ships in 1 to 3 days.
Reviews
Customer reviews
Reviews from our customers
In buyers' 19" racks 8
No buyer photos of this mount yet. These show other 19" mounts of ours.
This rack mount is perfect for a small Proxmox cluster built on 3x MinisForum MS-01 and a GL.iNet Comet X KVM. Everything is flush on the front, it's all supported well, and it's sturdy enough to support the weight. The ventilation space is also great given the small 3U space for 4 devices.
I will be coming here for my 3d print needs in the future.
Just perfect - precise measurements - great print quality - very considerate and speedy shipping.
5 stars isn’t sufficient! Outstanding! Accurate prints - no warping - really considerate shipping and communication.
Collin was great and his customer service is excellent.
Fast shipping and it fit great. May reach out to see if it’s possible to create one for a Ugreen NAS DXP4800Plus. Would recommend 3D Rack Mounts for any of your server rack needs where the vendor does not have anything available.