19" DrayTek Vigor2927, 2927ac, 2927ax & 2927Lac Rack Mount - 2U
$8.49 US shipping Arrives
A Double already fills both halves. Choose Single to pair it with another device.
Fits the DrayTek Vigor2927, 2927ac, 2927ax and 2927Lac in a 19 inch rack at 2U. The router sits in a full width tray with its front panel facing out, so the status LEDs, both USB ports and all six Gigabit ports stay in reach instead of the router sitting loose on a shelf.
At a glance
- Rack
- 19", 2U tall
- Material
- PETG, holds its shape near warm gear
- Made
- Printed to order in Illinois
⚠️ Before you order and install:
- Check the label on the base reads Vigor2927. This mount is cut to the 2927 chassis, and the older Vigor2926 is a different size.
- On the ac, ax and Lac models, unscrew the antennas before you slide the router in, then refit them once it is seated.
Fits
- DrayTek Vigor2927 (wired)
- DrayTek Vigor2927ac
- DrayTek Vigor2927ax
- DrayTek Vigor2927Lac
What you get
- The mount in three parts, a center tray and two rack ears, plus the M3 screws and heat set inserts that join them.
- Rack screws are not included, and neither is the router.
Material
3D printed in PETG rather than PLA. A dual WAN router this size runs warm all day in a closed cabinet, and PETG keeps its shape at temperatures that leave PLA sagging.
💬 For any custom design requests please message me.
Every 19" mount bolts together before it goes in the rack. Which guide fits depends on how this one is built:
- Two halves with a seam down the middle19" Modular Rack Mount: Assembly and Install
- A centre tray and two separate ears19" Extended Rack Mount: Assembly and Install
Either way: rack screws are not included, the oval slots take M6 and #12-24, and the device goes in last.
Questions about this part
Is this for a 10 inch or a 19 inch rack?
It is made for a standard 19" rack and takes 2U of rack space.
Are rack screws included?
No. Rack screws are not included, so use whatever screws your rack takes.
What is it made of?
PETG, which holds its shape near warm gear where PLA softens.
How fast does it ship?
It is printed to order in Illinois and ships in 1 to 3 days.
Reviews
Customer reviews
Reviews from our customers
In buyers' 19" racks 8
No buyer photos of this mount yet. These show other 19" mounts of ours.
Not only is the quality of the racks top class but also the help, communication and customer service from the team has gone above and beyond with every rack i have purchased from them. Cant recommend enough.
Collin worked with me to get two devices properly racked up, a Beelink computer and a Volt 1 Audio interface, for use in a live gigging rig, used for Keyboards or Guitars. This was a tough project with complicated measurements and the end result is spectacular. Very robust and gig worthy, and totally customized to my application. Highly recommend!
This rack mount is perfect for a small Proxmox cluster built on 3x MinisForum MS-01 and a GL.iNet Comet X KVM. Everything is flush on the front, it's all supported well, and it's sturdy enough to support the weight. The ventilation space is also great given the small 3U space for 4 devices.
I will be coming here for my 3d print needs in the future.
Just perfect - precise measurements - great print quality - very considerate and speedy shipping.
5 stars isn’t sufficient! Outstanding! Accurate prints - no warping - really considerate shipping and communication.