10" Netgear GS108EP & GS108EPP PoE+ Switch Mini Rack Mount - 1U

Fits the Netgear GS108EP and GS108EPP PoE+ switches in a 10" mini rack, 1U. Printed to the switch's own dimensions so it sits square in the rack with no brackets, tape or zip ties.

FITS

• Netgear GS108EP, the 62W PoE+ model
• Netgear GS108EPP, the 123W PoE+ model

Both use the same case, so one mount covers either.

⚠️ Before you order and install:

• Check the label underneath reads GS108EP or GS108EPP. The GS108E and GS108PE sit in a taller case and have their own mount in my shop, and the plain GS108, GS108T and GS108PP are different chassis again.
• The rubber feet ship loose in the box on this model. Leave them off, or peel them off if you have already fitted them, before sliding the switch in.

KEYSTONE OPTION
Choose one at checkout:

• No Keystones. Just the mount.
• +1 Keystone. One holder to the right of the switch, with an RJ45 keystone jack and an Ethernet cable included.
• +2 Keystones. One holder on each side of the switch, with two RJ45 keystone jacks and two Ethernet cables included.

The jacks and cables come with the keystone options, so you can bring a network drop out to the front of the rack without sourcing the parts separately.

WHAT YOU GET

• One 3D printed mount, plus the RJ45 keystone jacks and Ethernet cables that go with the option you pick.
• Rack screws are not included. Use whatever your rack takes.

MATERIAL
PETG, not PLA. A PoE+ switch runs warm around the clock, and PETG holds its shape where PLA starts to soften.

A 19" version of this mount is also listed in my shop. 💬 For any custom design requests please message me.