10" ICY DOCK ExpressCage MB326SP Drive Cage Mini Rack Mount - 2U

Turns an ICY DOCK ExpressCage hot-swap drive cage into a standalone 10" mini rack unit at 2U, with the drive trays facing forward so you can swap drives without unracking anything.

FITS

• ICY DOCK ExpressCage MB326SP-B and MB326SP-1B
• ICY DOCK ExpressCage MB324SP-B and MB324SP-1B
• ICY DOCK MB038SP-B

These share the same 5.25" front face, and the mount is open at the back so the slightly shallower models sit a few millimetres forward without binding.

DOES NOT FIT

• The flexiDOCK MB024SP-B, which is a much shorter cage.

KEYSTONE OPTION

Choose one at checkout:

• No Keystones. Just the mount.
• +1 Keystone. One holder to the right of the drive cage, with an RJ45 keystone jack and an Ethernet cable included.
• +2 Keystones. One holder on each side of the drive cage, with two RJ45 keystone jacks and two Ethernet cables included.

The jacks and cables come with the keystone options, so you can bring a network drop out to the front of the rack without sourcing the parts separately.

⚠️ Before you install: loaded with six drives and cables the cage runs over a kilogram, so fix the mount to your rack rails rather than resting it on a shelf.

WHAT YOU GET

• One 3D printed mount.
• The RJ45 keystone jacks and Ethernet cables that go with the option you pick.
• Rack screws are not included. Use whatever your rack takes.

MATERIAL

PETG, not PLA. It holds up next to drives that run warm, where PLA would soften.

A 19" version of this mount is also listed in my shop. 💬 For any custom design requests please message me.